Manual Electric Wire Stripping Machine
Manual Electric Wire Stripping Machine
Regular price
$29.99 AUD
Sale price
$29.99 AUD
Regular price
$0.00 AUD
Tax included.
Shipping calculated at checkout.
Available in stock
Couldn't load pickup availability
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Manual Electric Wire Stripping Machine
Wire Stripping Machine - Manual & Electric Drill Compatible (2-16mm Soft Cable Only)
Key Features:
- Durable steel body - high strength, long-lasting
- Full-metal bearing feed wheel - smooth, stable, and efficient
- Carbide sharp blade - hardened, wear-resistant, with dual bearings for smoother stripping
- Adjustable cutting depth - spring-loaded self-adjustment (1-6) plus manual screw fine-tuning
- Dual drive options - use the ergonomic hand crank, or connect to an electric drill for faster stripping
- Multi-hole feeder plate - suits different cable thicknesses within the compatible range
- Full-metal bearing feed wheel - smooth, stable, and efficient
- Carbide sharp blade - hardened, wear-resistant, with dual bearings for smoother stripping
- Adjustable cutting depth - spring-loaded self-adjustment (1-6) plus manual screw fine-tuning
- Dual drive options - use the ergonomic hand crank, or connect to an electric drill for faster stripping
- Multi-hole feeder plate - suits different cable thicknesses within the compatible range
Compatible Wire Types:
Suitable for soft-plastic sheathed wires, optical cables, multicore cables, twisted wires, aluminium wires, soft copper wires, hard copper wires, and similar flexible cables.
Diameter range: 2mm - 16mm
IMPORTANT - NOT SUITABLE FOR:
This machine is designed for soft outer sheath only.
DO NOT use on:
DO NOT use on:
- Wires with iron or steel armour / metal cladding
- Hard plastic outer sheaths
- Flat cables (ribbon-type)
- Any cable with sheath thickness over 6mm
- Hard plastic outer sheaths
- Flat cables (ribbon-type)
- Any cable with sheath thickness over 6mm
Using this machine on unsuitable wires may damage the blade, jam the gears, and void any claim.
---
STEP-BY-STEP OPERATION TUTORIAL
Please read and follow every step carefully before use:
Step 1 - Check Blade Alignment
Confirm the blade is aligned with the gear V-groove.
If not, adjust the blade position until they match.
Confirm the blade is aligned with the gear V-groove.
If not, adjust the blade position until they match.
Step 2 - Feed the Wire Straight
Keep the wire completely straight as it enters the machine.
Ensure no gap between the two feed gears - they must touch firmly.
Keep the wire completely straight as it enters the machine.
Ensure no gap between the two feed gears - they must touch firmly.
Step 3 - Test Blade Rotation
Manually spin the blade with your fingers to check it turns freely.
If it does not rotate, loosen and adjust the two screws on both sides of the blade until it moves smoothly.
Manually spin the blade with your fingers to check it turns freely.
If it does not rotate, loosen and adjust the two screws on both sides of the blade until it moves smoothly.
Step 4 - Correct Feeding Direction (Very Important)
The inlet plate must stay in the lower position at all times.
The wire needs to climb upward (like going uphill) into the machine.
Keep turning the hand crank while feeding - this assists the climbing motion.
The inlet plate must stay in the lower position at all times.
The wire needs to climb upward (like going uphill) into the machine.
Keep turning the hand crank while feeding - this assists the climbing motion.
Step 5 - Adjust Blade Pressure - DO NOT OVERTIGHTEN
Gradually increase the pressure while feeding the wire.
Stop and check: the blade should just cut through the outer insulation - not go deeper.
If you tighten too much in one go, the blade will dig in and the wire will stop moving. This will jam the machine and may damage both the wire and the blade.
Gradually increase the pressure while feeding the wire.
Stop and check: the blade should just cut through the outer insulation - not go deeper.
If you tighten too much in one go, the blade will dig in and the wire will stop moving. This will jam the machine and may damage both the wire and the blade.
Tip: Adjust a little, test a short piece, then fine-tune - this gives the best result.
What's in the Box:
1 x Wire Stripping Machine
1 x Wire Stripping Machine
Please note that deliver to PO BOX address is available for products below 22kg and 1M length. Please make sure you have provided a correct physical address during checkout on products of excessive size.
Our shipping system cannot accept order changes or cancellation after payment is made. You can follow our return policy for more information.
To aim in smooth and speed of delivery, ensure your address is correct during the checkout. With correct information provided, your order is dispatched within 1 business day. Any changes to address after payment made will not be considered.
Please allow 2 to 12 business days for product to arrive. We highly recommend to provide an answerable contact number and email address as we do make call to follow up item delivery status.
Your item will be sent via Australia Post or courier depending on its size and weight.If for any reason you’ve changed your mind about any of the products you purchased from us, simply contact us within 30 days to be guided through getting a refund. Please do not return or post items before obtaining instructions from us first. If you do, there is a risk that your returned item may not be identifiable and accepted. This change of mind return policy does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items.
Returned items must be in resalable condition and returned in their original packaging with all accessories. You will need to send the product back on your own cost and there will be an applicable freight fee and 20% restocking fee for change of mind returns. This also applies to orders canceled when the item has already been dispatched from our warehouse. The item must be in a re-saleable condition to qualify for a change of mind refund. Under no circumstances will we issue the refund before we have received your product back to our premises and checked it as being in the original unopened and undamaged packaging.
Returned items must be in resalable condition and returned in their original packaging with all accessories. You will need to send the product back on your own cost and there will be an applicable freight fee and 20% restocking fee for change of mind returns. This also applies to orders canceled when the item has already been dispatched from our warehouse. The item must be in a re-saleable condition to qualify for a change of mind refund. Under no circumstances will we issue the refund before we have received your product back to our premises and checked it as being in the original unopened and undamaged packaging.
